Tag Archives: Tip Overlays

Sinew Backed Yew Holmegaard 70#@28″ (bow no. 17)

Back in the spring I was contacted by a friend of a guy who had purchased the character yew flatty I blogged about here: Primitive Character Yew Flat bow 52#@28” (Bow no. 14) – Southmoor Bows which he had bought through the Southmoor Bows ETSY shop. This guys friend really liked that particular bow, so he got in touch with me to ask if I could build him something with a primitive vibe, but a bit heavier, as this chap came from a ELB background and was accustomed to shooting bows in the 65lb plus bracket.

After a bit of discussion we settled on a plan. I had in my possession a rather nice and character laden Yew branch sucker stave, which I could easily envisage being turned into a Holmegaard type longbow. This stave measured 71″ so was both long/wide and clean enough to produce a heavier draw weight bow built in a classic Holmegaard/pyramidal/flatbow type design, as opposed to something more like an ELB, which is a widely accepted design, recognised as being well suited to bows intended for higher draw weights.

We’d settled on a target draw weight of somewhere around the 65-75lb mark, so I had to now figure out how I could optimise the bows design and features to encompass the heavier than average draw weight, as well as all the wonderful characteristics of this particular stave.

Rather than go full on Holmegaard and get all anal about precise authentic dimensions, I decided to let the stave dictate the overal profile. And to ensure long term durability I opted to incorporate a robust application of sinew backing to minimise both potential set, and vulnerability to wear and tear over time.

So my plan was to build a straight limbed pyramidal profiled long bow with semi lever like needles for tips, and a completely static handle section. The bow would end up 70″ nock to nock and have 8″ static tips. These none bending tips, combined with a 4.5″ stiff handle with 3″ long flowing fades, would leave me with just about 43.5″ of working limbs. Since this wasn’t a massive amount of moving wood, I decided to lay the bow out asymmetrically so as to give the bottom limb a bit more support over the long term.

The intention was to maintain the original crowned shape of the back, whilst adopting a rounded D shaped belly cross section throughout the fades and working sections of the limbs. The tips would transition in cross section from D shaped to ridged to reduce mass whilst remaining static. The handle would remain deep and relatively straight with no shelf as the chap who asked me to build this bow was a fan of shooting off the knuckle.

The stave had no overall natural reflex or deflex, but the 6 sets of branch whirls which were evenly distributed between both limbs did have some contour, thus giving the false impression of deflex where the grain flowed around the knot whirls. These flowing lines would need to be incorporated into the final profile of the bow as my intension was not to interfere with the natural shape of the staves side profile. Fortunately, this particular stave was completely absent of any twist or snake, so other than working around the knotty branch whirls, laying out the intended profile was, for once, a doddle!

The Heartwood/sapwood ration was about right too, with this stave having no more than 1/4″ of sapwood under the bark. Subsequently, I only had to get the bark off in order to expose what would end up being the back of the bow directly below the sinew. This meant that the final composition of heartwood/sapwood would end up being around a 70/30 ratio. Perfect!

So after roughing out the face profile and reducing the belly to facilitate better drying, I set about the arduous process of applying 3.5 oz of wild red deer leg sinew, applied to the back of the stave with my own home made sinew glue cooked up from a bunch of sinew scraps and tendon sheathing material. After applying all the sinew and given the glue plenty of time to set up, I wrapped her in gauze and left her to dry and cure out completely for 6 months. And what a long wait that was!!

The sinew backing came out great, so after what felt like an eternity, I fitted a pair of stag horn tip overlays and got a long string on her for a few short pulls. All looked good and after a bit of tweaking here and there, she was soon at brace and being pulled to 26″

As usual, I like to spend a fair bit of time shooting in a bow before attempting to get the last couple of inches of tiller finalised. So I spent a week putting her through her paces so that she could settle in and reveal any tiller correction that might be necessary before calling the job done. For once this bow didn’t budge off tiller, and had settled in to a nice 1/4″ positive tiller, which felt very well ballanced at full draw.

Final touches included a stag horn inlay for an arrow pass, and a gorgeous piece of my home produced bark tanned red deer leather as a handle cover, all sewn up with lace cut from some flank leather from the same hide. To seal her up I saturated the gorgeous grain of the wood with several applications of raw tung oil, caped off with half a dozen coats of Danish oil to fully protect her from dirt and moisture. Last but not least, the glossy Danish oil finish was sanded smooth and polished with fine pumice powder to leave her with a beautiful satin finish which sheds water and really shows off the grain.

I really enjoyed building this bow and will definitely build another “Holmegaard” like this one just as soon as I get my hands on another suitable stave. She’s a little on the heavy side for me personally, but I did enjoy the speed and power that was greater than what I’m used to. The loud whack she delivered when sending my stumping arrows on their way never got boring! She turned out to be quite nippy across the chrono too by consistently sending 550 grain arrows over the sensors at between165-175Fps, which, I’m sure you’ll agree, isn’t too shabby for a simple English yew branch stave!

Specifics are as follows:
Draw Weight: 70lbs at 28”
Mass: 850 grams
Length NTN: 70”
Width: 1 7/8″ at widest part
Tips: 8” static 1/2” wide
Back: Crowned with undulations. : Pyramidal face profile
Belly Profile: Working limb sections D shaped, transitioning at the tips from semi circular, into ridge shaped cross section.
Tiller: Eliptical. 1/4” positive
Brace height: 6″

Anyway, here she is. Hope you like her!

Native inspired Yew HLD R&D Longbow 46#@28″ (bow no 16)

This bow started out life as a fairly short branch stave at 62 inches, but I had to lop off another couple inches due to deep drying checks in both ends. This left me with around 58 inches to play with, which isn’t really enough to produce a bow intended to reach a typical 28″ draw length, so right off the bat I planned on being content with a 26″ final draw length, if she survived the plan!

The stave had a small amount of natural reflex at the middle of the handle section, and natural deflex in what would be the inner third of the top limb, so rather than fighting with that, I opted to add the same amount of deflex to the inner third of the bottom limb to balance the natural shape of the stave.

Since the stave was quite short, I also opted to flick the tips to counter the deflex a bit, plus, since she would end up quite short, the recurved tips would significantly reduce any likelihood of uncomfortable stack at the end of the draw. Whilst shaping the bottom limb I also took the opportunity to improve the overall string alignment by tweaking the outer third of the bottom limb in order to make the alignment of the tip section straighter, which in turn pulled the string back in line with the centre of the handle.

I always seem to find that deflex reflex profiled bows tiller a lot quicker and easier than straight limbed bows for some reason, and this bow was tillering out nicely. That was until I uncovered a significant and unavoidable delamination in one of the heartwood growth rings in the top limb. The ring was so deep that the only way I was going to clear the delamination was by digging out most of the heartwood. Since most of the heartwood was going to have to leave, I was left with no choice but to opt for a mild hollow limb design as all I was left with was mostly high crowned sapwood to build from. Fortunately I’d not removed any sapwood at this point as i didn’t feel the need to chase a ring, so I still felt confident that I had enough wood to make a bow.

Personally I prefer a yew heartwood/sapwood ratio of around at least 50/50, but this bow was going to end up more like 40/60. Many bowyers would condemn such a ratio, but in my experience, for flatbows at least, an almost entirely sapwood yew bow will still make for a snappy shooting and durable bow if tillered well. And this bow did not disappoint, despite the loss of so much heartwood.

In order to emphasis what little heartwood I was left with, I decided to fume this stave in ammonia, which really added some character by giving the wood a unique, almost antique like look which only yew can bring about. I’ll definitely be fuming more yew bows in the future as the results I’ve experienced so far have been fantastic!

This stave had a couple of potentially problematic knots in the top limb which needed to be delt with before putting any significate torque on them, so after drilling the soft rotten material out, I decided to plug them both with yew heartwood, as there was quite a cavity left after all the muck had been removed.

After getting to brace height I decided to rawhide back her with wild red deer rawhide for extra durability, which left me with quite a canvass to decorate after tillering was completed. Since I had nothing in the way of snake skins to back her with, I opted to use a native design which I’d seen in the Bowyers Bible Vol 1. So after shooting her in I mixed up some of my local Devonian earth pigments with my own hide glue and set about painting the backing in a pattern inspired by the “Hupa” Western Indian tribes recorded from the Northern California/Southern Oregon region.

Tip overlays and arrow passes made from red deer antler were fitted, and the handle cover was made from a gorgeous piece of Bark tanned wild red deer leather, which I tanned myself in sitka spruce bark that came from the very same group of trees which are in the background to the photos bellow. The leather grip is also sewn up with red deer leather lacing.

After a lot of shooting in and a little re tillering to balance things out post settling in, I was really pleased with the end result. She’s super pointable, snappy, light in the hand and performs without any hand shock at all. And she turned out to be a nippy little thing, consistently hitting speeds around the 150FPs mark shooting a 500 Grain arrow. She would make for a great hunting bow, especially in a blind as she’s so manoeuvrable due to being so short.

She is now listed in my Southmoor Bows Etsy shop and can be found here: Yew Longbow 4626 – Etsy UK

Specifics are as follows:
Draw Weight: 46lbs at 26”
Mass: 630 grams
Length NTN: 57”
Width: 2” at widest part
Tips: 4” semi static 3/8” wide
Back: Crowned with undulations. : Pyramidal face profile
Belly Profile: Working limb sections undulating to mirror back, transitioning at the tips to D shaped/ridge cross section.
Tiller: Aggressive eliptical. 1/8” positive
Brace height: 5.5″

Here she is:

Primitive Hawthorn Flat bow 52#@28″ (Bow No. 15)

A good friend of mine does a fair bit of hedge laying through the winter months and has been kind enough to supply me with several nice bow staves over the years. Most of these staves have been Elm, Ash and Hazel. One bow wood which I’ve been badgering him about for years is Hawthorn. So it came as a nice surprise when he walked me out to his shed to show me what he’d accumulated for me over the winter. Because sat in the rafters was a reasonably clean, straight and fairly untwisted 70” long Hawthorn stave!

When I say “clean and straight” I mean by Hawthorn standards. The best of hawthorn would still deter all but the most insane of bowyers (like me). And by “untwisted”, what I actually mean is propeller twist of less than 45 degrees, because around here at least, if you can find a Hawthorn stave with less than 45 degrees of twist then boy have you done good!!

I like to split my bow wood logs into staves, and I could have done that with this hawthorn log as it was about 5” in diameter. Trouble is, every time I try this with hawthorn, it splits out into a spiral of doom, terminating with a grain run out which you can absolutely guarantee will run across the proportion of the log which would have made for the back of your bow. I was not going to take that risk with this precious log!

Hawthorn is nice bow wood. Let me explain what I mean by such a statement as there will be seasoned bowyers reading this that will screw their faces up at the very thought of using such a problem laden wood for bows. Hawthorn, with its twist, knots, interlocking grain and undulating back topography will certainly challenge the best of us. But with a bit of patience, and the right design, Hawthorn can make for a powerful, hard hitting bow which will rival many yew bows in terms of performance.

Hawthorn, like most UK thorn species, is more flexible and springy than many other white woods. Most whitewoods in my experience are quite stiff. Hawthorn however is one of only a few whitewoods which has about the right balance between tension and compression strength. Most white woods, at least here in the UK, are very strong in tension, but they lack the compression strength necessary to withstand the crushing forces which the bellies of whitewood bows routinely experience. This creates a challenge for bowyers and requires consideration to be given to bow design in order to mitigate the problems of using such tension strong woods.

Hawthorn is a bit different. Hawthorn has a much more balanced distribution of tension and compression strength. In fact I’d estimate the balance between tension and compression to be pretty close to even. With all that said, correct bow design is still important when using hawthorn, but not as important as when using woods like Ash and Hazel. Leave too much back wood working on a compression weak white wood like hazel, or worst still, not enough belly wood working, and you will experience fretting on the belly for sure. And that’s even with a perfectly tillered bow.

For this reason I typically reduce the amount of back wood which is truly working on most whitewood bows. This can be done a couple of ways. An example would be to use a stave with a naturally moderate to high crown. A high crown ensures that only the central section of the back is working and therefore coming under tension. Another way to balance the tension and compression forces on a tension strong wood could be to keep the entire width of the belly nice and flat so that all of the belly is working against the compression forces brought about by the tension strong back. Heat treating the bellies of compression weak timbers can also help to strengthen the compressive qualities of woods with weak bellies. But go careful with heat treating. Cook it for too long and you can make belly wood even weaker.

But none of this is necessary with Hawthorn. On a hawthorn flat bow at least, you can have just as much back wood as belly wood working and you will likely not experience chrysaling. Or at least you won’t as long as you have a well designed and tillered stick without any hinges of course!.

Heat treating the bellies of Hawthorn bows is unnecessary in my experience. Whilst heat treating woods like Ash, Elm and Hazel will undoubtedly make these woods behave more springy, Hawthorn is plenty springy enough just as it comes.

A conversation about hawthorn as a bow wood wouldn’t be complete without touching upon the down sides however. And one of the main down sides to Hawthorn is its tendency to check quite badly during the seasoning process. For this reason I work all of my Hawthorn staves down to as close to final dimensions as I dare. And I do this as soon after felling as is humanly possible.

Normally, if I’ve felled a Hawthorn stave myself, I’ll be planning to get the bark off and work it down to within a couple of millimetres of final dimensions the same day as I felled it. That way I’ll be sure to have removed the bulk of the staves pith therefore significantly reducing the very real risk of the stave splitting out from the bark right to the central pith of the log. That kind of splitting happens very quickly with Hawthorn. And you can bet your bottom dollar that if a drying check does emerge, it will be right through the face which you intend to use as the back of your bow!

The Hawthorn log which my mate had kindly stashed away for me had indeed split and badly. But since the whole log was relatively clean of knots, I was fortunately able to find a face which did not contain one of the deep drying splits.

Once home I set to the log with my axe and within half an hour I had a roughed out stave without any major nightmares to contend with. I was very careful to follow the grain with the axe as the natural tendency of the grain was to spiral. Fortunately the amount of spiral in the log was manageable and ended up being about 30 degrees of propeller twist.

Since this stave was still wearing its bark, the next thing I needed to do was get the bark off. Since the log was cut in the middle of winter, the bark was stuck on good and proper, so I took the draw knife to the bark with a view to leaving a trace of cambium behind to serve as some level of protection whilst the stave was being worked on.

Once the bark was off, I clamped the stave to a flat form and parked the clamped stave in a warm spot for a couple of weeks. The stave was still very green at this point so I was hoping to use the opportunity to clamp out some of the twist on the form whilst the stave was still able to lose a significant proportion of its heavy moisture content.

When the stave finally came off the form, it had actually gained a fraction of reflex. Some of the twist had come out but about 10 degrees remained and would have to be heated out at a later date. For now though, I needed to get the moisture content down to as low as I could get it, which normally works out around 6 – 8%.

I have a room in my house which is both warm and has low humidity. I built a bow rack in this room so that I can store all of my wooden bows, and all of my drying roughed out bow staves, without the risk of them gaining moisture or getting bent out of tiller. The rack enables me to keep all of my bows lying horizontally, whilst being supported at only two points situated approximately mid limb. This ensures that the distribution of gravitational force is equal across my bows whilst they are not in use.

The wall against which the bows supports are fixed is the back of my chimney breast, so when the wood burning stove is in use, the wall gets nice and warm. This increases the ambient temperature within the whole room, but especially around the immediate vicinity of the bow rack. 

This slow and steady maintenance of warmth, combined with a dehumidifier situated in the middle of the property, really speeds up the drying process of green staves. Especially during the winter months, which is when I like to cut most of my bow staves. This arrangement also keeps all of my finished bows at below 8% moisture content all year round. So with this set up in mind, within just a few weeks I was able to get this stave down to a point where it was not losing any more weight.

So once the weight loss had completely ceased, I set about fixing the 10 degrees of remaining propeller twist. Some dry heat applied to the fades and limb tips and some strategic application of force in the right direction got the twist out easily. Another benefit of using Hawthorn as bow wood is that it bends quite easily with both dry and steam heat.

In fact, as long as a piece of hawthorn is clear of knots, some pretty aggressive bends can be put into Hawthorn using steam. And dry heat can move Hawthorn a good bit too. I wouldn’t say that Hawthorn heat bends almost as well as yew. Or at least it certainly bends much better than most other white woods!

Whilst I was in bending mode, I used the heat gun to very slightly flick the tips and perfect the string alignment, which was pretty good from the start. Then after a day to reacclimatise after all that heating, I set about finalising the face profile which had been left excessively wide to facilitate better torque when using my G clamps to pull the twist out.

The design I was planning for this stave was nothing fancy. I just wanted a nice, clean, functional, hard shooting right handed flat bow. My idea was for something in the region of 50-60lbs at 28” with a pyramidal face profile merging long fades and nice fine semi static, lightly flicked tips. These tips would be fitted with overlays. The handle would be 4” long, rigid, and without a shelf and inlayed with antler at the arrow pass.

Since the limb face profiles were tapering evenly through the working sections, I wanted to keep the tiller elliptical so as to spread the work evenly across the whole of both limbs. For this reason I also decided to only very slightly flick the semi static tips. This design would maximise the retention of as much of the slight overall reflex as possible. And for the same reason, since the overall length of the stave was now 66” after cutting of the split ends, I was looking to maintain all of that length in the finished bow. This gave me plenty of bow to provide long working limb sections which would help avoid any risk of overstressing a bow which was destined to be drawn to 28”.

With the face profile finished and the handle and fades basic shape finalised, I set the working limb thickness up as close to even as possible. The back of the bow was carrying some undulation and a significant knot presented in the middle of the inner third of the lower limb, so with the gouge and the curved scraper, I followed the limb thickness up and over all the high and low spots to mirror on the belly what was presenting on the back. As time consuming as this process is, it really is worth it in my opinion as it ensures true, even distribution of thickness across the length and width of the limbs. This in turn increases the likelihood of achieving an even distribution of tension and compression throughout the entire length and width of the working sections of the limbs. Extra meat was left around the large knot to provide some extra strength there.

Before proceeding to tillering I wanted to experiment with a process which I’d been wanting to try for some time. This process is called “fuming”. I’d come across this process whilst drooling over some of the beautiful works of art produced by seasoned bowyer Simon Sieß who’s inspirational and informative website can be found here: Stonehill Primitive Bows – Handing the flame on since 2005 (primitive-bows.com)

Simon and I have shared conversations in the past about the whole process of using ammonia fumes to colour and darken tannin rich woods like hawthorn. Simon has a great article on his website which details the process of fuming and can be found here: Fuming experiments – Stonehill Primitive Bows (primitive-bows.com) Inspired by Simon to try fuming hawthorn, I set about following his advice and proceeded to fume this hawthorn stave for two weeks. The colour transformation was wonderful! And the colour transformation had penetrated deeply throughout the fibres of the entire bow, just as Simon had described. Thank you Simon!!

After letting the now damp fumed stave dry for another couple of weeks to remove the strong smell of ammonia as well as restore the staves pre fuming mass, I was now ready to start long string tillering. So I cut in some tillering nocks so that I could get the long string on and see what she looked like when pulled down an inch or two on the tillering tree. A bit stiff in the out thirds was my first thought and the bottom limb was looking considerably stronger than the top limb. So after letting off the outers, and dropping some wood off the whole of the bottom limb things were starting to look quite balanced.

Once I’d got her down to brace height I could see that a little bit of limb twist had returned so a little more dry heat in the top limb got things back to nice and even. I could also now see that a 4” section in the middle of the bottom limb was carrying a bit more reflex than everywhere else. This was resulting in the appearance of a very heavy positive tiller. I decided to heat this reflex out a little to create a more even overall reflex of the bottom limb. This resulted in a much more even looking side profile at brace whilst still maintaining a 3/16” positive tiller overall.

After achieving as good an elliptical tiller as I could I began pulling her down a bit further. I stopped at 22” I checked the draw weight. I was getting around 55lbs at 22” so clearly had a bit of wood still to remove before I could push on down to 26”. So I kept on perfecting both limbs by carefully removing more wood from the bellies of both limb wherever I figured I could improve the evenness of limb thickness or the visual presentation of bend.

Once I was down to 52lbs at 26” I called her done. No signs of any overstressing were noticed and overall, set was minimised to about 1/4 of an inch, which is what I would expect from a nice dry hawthorn stave. Since I was now close to shooting her in, I shaped the handle up to facilitate putting a few arrows through her. Since this required the removal of a fair bit of wood from the handle and fade sections I thought I’d better recheck the string alignment to see if there had been any change. I could now see that the alignment had shifted slightly away in the direction of the right side of the bow.

Since this bow was intended for right handed shooting, I really wanted any string bias to favour the left side of the bow, so I gently reheated the handle section with dry heat once more and eased the tips back across to the left hand side of the bow. Once cooled off thoroughly a quick recheck of alignment with the help of a piece of string and some hand clamps now confirmed that the string alignment was back to just favouring the left side as originally planned. Perfect for a right handed shooter.

Time to shoot in the last 2” of tiller. On went a piece of leather strip would make do for a quick and simple handle wrap/arrow pass. Then out we went for some stump shooting. I like to give all my unfinished bows a good bit of shooting in before committing to final touches. There is nothing more upsetting than going through the whole finishing process only to identify an issue with the tiller once the bow is properly shot in.

I always put at least a couple of hundred arrows through a bow before I consider finishing a bow. Even the most perfect of tillers witnessed on the tillering tree can change dramatically after a few hundred arrows, so I always expect to see some change and need for adjustment before I embark on sanding and sealing a bow. The last thing any bowyer wants to have to do is make tiller adjustments to a bow which has already been finished.

This bow had moved a little during the shooting in phase and the tiller had droped from 3/16th” positive down to about 1/8” positive. I personally think that a bow with these dimentions and draw weight would better suit a 3/16th – ¼” tiller if it’s likely to be shot with split fingers. So I let the top limb off a tad bit more to regain that nice 3/16th” positive tiller. This resulted in the weight being reduced slightly which when combined with the sanding and shooting in was now registering as 52lb at 28”. This was pretty much what I wanted so I was happy with the final weight.

To finish her up I set about fitting her with a nice pair of wild English Red Deer antler tip overlays. The tips where shaped up nice and fine transitioning from flat to triangular. Antler was used as a an arrow pass inlay too. I wrapped the handle with a piece of my own traditional bark tanned deer hide and finished the whole bow with tung oil which really darkened the colour change brought about by the ammonia fuming. Wow! For a bow string I made a 12 stand Flemish twist from B55 which was fitted with beaver fur string silencers.

Now that the tips had been reduced in mass and the bow was completely finished I wanted to shoot her again to get a real feel for any hand shock. I also wanted to hear what she now sounded like with silences fitted to the string. And what a difference tip mass removal makes to the feel of a bow upon release! The little bit of hand shock which I’d earlier felt when shooting her in was gone. And the release was now whisper quiet too. I experience this change all the time and put it down to two things in the main.

First and foremost I believe that most hand shock and vibration in general is due to poorly timed limbs. This is why I favour a 3/16th – ¼” positive tiller on all of the bows which I make which are intended for split fingered shooting. 1/8” just isn’t quite enough to remain permanent in my opinion and can soon get pulled out to neutral, or worse still, negative! Shoot a negatively tillered bow split fingers and feel the vibration and hand shock and you’ll soon know what I’m talking about.

The mass of the tips is the next most important consideration to make when designing a bow to have minimal vibration/hand shock. By minimising the mass above the knocking points especially, as well as throughout the last 6” of the limbs tips, vibration upon release will be reduced significantly. Shout out to many of the incredibly talented bowyer at Primitive Archer forum for emphasising these points to me many years ago.

So to sum this bow up, she ended up being a smooth, quiet, hard shooting bow with no noticeable hand shock and minimal stack. Immediately after unstringing she holds about ½” of deflex which goes back to neutral after resting. She’s nice and light in the hand but packs a nice punch. She would make for a lovely hunting bow (if only!)

Anyway, I hope you enjoyed the story of her build and like the look of her. This bow is now listed for sale in my Etsy shop and is available for purchase here: Primitive Character Hawthorn Selfbow 5228 – Etsy UK

Mass: 732 grams

Length NTN: 65”

Width: 2 1/4” at widest

Tips: 6” semi static 3/8” wide at tips

Back: Marginally crowned with undulations. Face profile pyramidal.

Belly Profile: Working limb sections undulating to mirror back, transitioning at the tips to D shaped then triangular cross sections.

Tiller: Elliptical 1/8” positive.

Brace Height 6″

Draw Weight: 52lbs at 28”

Primitive Character Yew Flat bow 52#@28” (Bow no. 14)

I wanted a yew branch stave to start thinking about beginning work on, so I set about rummaging through the pile of yew branch staves I have in storage. There I came across an interesting and character laden stave which was cut several years ago. I know this because I write the date that all of my staves were cut on one end after the end grain sealer has dried.

This particular branch stave caught my eye because it had a nice bit of wiggle and a few small knots which would add character without compromising strength. This stave was pretty long but one end kicked out massively and also held a dodgy looking bulge/knot. I decided to lop this 8” section off and just try and work with whatever length I was left.

Even with the end missing, I was still left with 63” ish to play with. So now that this stave had been significantly reduced in length, the shorter than ideal overall length would definitely influence the design of this bow, as bows this length and with this much character typically need a bit of thought in order to mitigate stress if intended to be drawn to 28” or more.

Before committing to a build though, I always like to give a stave a bit of axe time in order to get a bit of a feel for the stave, plus to try and identify any major problems I might encounter once work commences properly. 10 mins with the axe and I’d uncovered a potential problem. Hidden under the bark on the belly side of this stave was a drying check, and it looked like it might run deep.

Much of the bark on the face which I’d chosen as the back was very loose. I managed to pop a fair bit of this bark off by hand. I’d managed to uncover the section of sapwood under the crack, and fortunately, I could see no sign of the crack emerging on the surface of the back. Phew!

So I pushed on working down the belly, hoping that the crack would fall out at some point. And to some extent it did but the belly side of the handle section was never going to lose that crack completely, unless I reduced the handle thickness down to proportions which would make it bend slightly. And even then there was a good chance that some of the cracked pith wood would remain within the bow.

I wasn’t averse to this though, as the bow was going to end up fairly short by longbow standards, and a bendy handle would spread the work load by adding an extra 8” (4” handle + 4” fades) of bow to the total length of “working” bow.

After roughing out the belly a bit more to give me some feel for where the bow would best sit, I set about marking out the handle. The best spot for the handle given the crack and the other features was actually about 2″ away from dead centre between the limbs, so I decided to make this bow asymmetrical.

Next I wanted to rough out the face profile so that I could see what the sapwood/heartwood ratios were like, so after popping off as much bark from the limb sections as possible, I took the draw knife to the sides. This stave was only moderately crowned and was always destined to be a flatty, so I worked the edges down to a vague pyramidal profile to see if I could work around the major features without compromising strength.

There were four knots which were large enough to need to be kept away from the edges, two in each limb. Fortunately, all four of these knots could be kept off the edges without having to divert the natural flow of the lateral grain which could potentially compromise the integrity of the bow through excessive grain run out. I always like to follow the grain!

A few pin knots would present on the edges but none of these looked like they would cause me any trouble. The only other issue that the knottiness of this stave would create would be in preventing the application of significant heat bending. Recurving the tips was definitely out of the question as the top tip section was carrying enough knots to cause it to bust off if significant heat bending pressure was applied.

A lack of recurve was actually a good thing as I could now simply reflex the outer thirds slightly leaving both tips static for the last 4” therefore minimising stress to this fairly short stave. Since the handle section plus all but 4” of the tips would be working to some extent, there was now a real likelihood that this bow might even draw to 28”, despite being as short as it was plus having lots of potential weak points, AKA “character”!.

I should probably mention here that after getting all the bark off, I was struck by the beauty of the back of this bow. The sapwood was infected by that gorgeous bluey grey staining which yew sapwood often gets, This gave the back some wonderful colour variation which I know from past experience looks great when finished with a quality hardening oil such as Tung or linseed oil . In addition to the wonderful colour, the back of this stave had quite a bit of nice wiggle and undulation too, all of which was orientating around and over a multitude of pins and knots on both limbs. It reminded me of a piece of driftwood art, only with a tangerine belly!

The ratio of sapwood to heartwood was around 60/40 but there was absolutely no way I was going to attempt to reduce the sapwood on a stave like this one with such a striking and character laden back. So the ratios would have to remain. Not that this was going to be an issue anyway as the heartwood on this bow was that wonderful deep and dense orange stuff with the nice tight growth rings. Yummy!

Once the face profile was established and the handle and fades roughed out, I took a bit of time to study the small amount of twist in both limbs. This would come out easily with dry heat, as would much of the excessive deflex and reflex which was apparent at several points between the fades and the tips of both limbs.

So before going any further, I decided to spend a bit of time getting all the twist out, as well as easing off some of the unsightly deflex and reflex. A total of six sessions with the heat gun spread across a couple of day finally resulted in a stave which now looked completely free from twist and had a fairly even distribution of about 2” of overall reflex.

At this stage I’d left the limbs a bit on the thick side so that I could dig out the belly to mirror the crown and its generally undulating topography. There was no way this bow would have an even distribution of thickness (and therefore stress) unless I followed the back as a guide to dictate the profile of the belly.

So once the final thickness of the sides was established with the drawknife and the rasps, I began to dig out all the dips and valleys with the gouge and curved scraper. As is usually the case, this wasn’t a five minute job, but a job well worth doing all the same – in my opinion. And once I felt that I’d created an even thickness throughout, I set about floor tillering both limbs.

Once both limbs felt and looked like they were bending evenly on the floor, I cut in some tillering nocks and popped her up onto the tiller tree for a few first pulls with the long string. “Pretty good” was my first thought, although I was now made a little more aware of a bit of rather ugly looking deflex which was presenting itself in the top fade and also at a point about one third up the top limb. At this point I should probably say that I’d chosen the top limb to be the limb which had a rather nice wiggly tip section. I could imagine this tip looking great once refined and augmented with a nice elegant overlay.

This delfex in the fade just would not do however. It would not be possible to remove it completely but I felt confident that much of it could be reduced. I should also say that the top limb which contained this 4” deflexed fade was showing significantly weaker than the bottom limb on the tiller tree. So by straightening out as much of the deflex in this weaker top limb, I’d hopefully enhance the look of the top limb whilst simultaneously added some strength to it.

I couldn’t be bothered with trying and steam bend out the deflexed fade, so I simply clamped the deflexed fade over one of my reflex forms and gave it a good heating up with the heat gun. After a couple of attempts I was much happier with the small amount of deflex which remained. The heating process had also added significant strength to the top limb too and now had the bow presenting a ¼” positive tiller.

Conscious that some of the newly applied heat adjustment might pull out, I opted to reduce the bottom limb a tad in a couple of very slightly stiff spots. Brace height was achieved quickly thereafter and in no time I was pulling down to 22”.

A quick check with the scale showed around 40# at 22” which wasn’t too bad considering the amount of belly wood which had come off in order to lose the initial cracked section. I figured 28” would be pushing 50# by the time the tillering was finished so was quite happy with where she was at this point.

A few more tweaks with the scraper and 26” was reached quite quickly. Time to check tiller, string alignment (which was pretty good all along), and also check to see if any twist had returned. The tiller was holding firm at ¼” positive and the string alignment looked to be dead centre. A very small amount of twist had returned to the last 10” of the bottom limb tip. So a quick session with the heat gun took the twist out again and all was looking quite good.

The pith wood cracks in the handle section were not going to fall off this bow since I had already narrowed the handle thickness as much as I could. Any more wood removal from the handle and fades would see them start bending too much. In my experience, too much bend in the handle ends up robbing a bow of significant cast. I wasn’t going to take this risk just to lose a few pith wood cracks which were never going to compromise anything other than aesthetics.

So instead, I opted to pump all the handle/fade cracks and belly knots full of good old nice thin super glue, so that they would stay shut up forever and would sand nice and smooth for finishing. In no way would any of these features ever compromise the structural integrity of this bow.

The scale was reading around 49 ish# at 26” and everything was looking quite good so I called it done for now, opting as usual to shoot in the last 2“ of tiller. A couple of weeks of stump shooting with this bow was great fun and I was pleased to see that the tiller still felt very well balanced for split fingered shooting and had only reduced by a fraction.

After a lot of shooting she had settled into a tiller of 3/8” positive. Limbs felt and sounded like they were timing well which is likely why no hand shock was apparent when shooting this bow, even with the limb tips left wide for temporary tillering nocks.

Happy with the tiller and having proven that the bow was a survivor, I cracked on with finishing her. I gave her a pair of buffalo horn tip overlays and a good sanding and polishing before sealing her up with a bunch of coats of oil. The handle was begging to be kept simple and since she was always destined to be shot off the knuckle, I opted to wrap the handle primitive style with a nice strip of deer rawhide which I stained black with an application of bark tannin solution followed up with some home made iron chloride. The black rawhide wrapping matched the buffolo horn tips which I thought was both fitting and functional.

With the bow finished I put another hundred or so arrows through her to see what she felt like now the handle was wrapped up and the tips had been refined. She was now more comfortable to hold and a fair bit quieter to shoot too. The beaver fur string silencers were helping in this regard but I always notice a reduction in vibration when a bow has mass reduced from the tips. And since the tips on this bow were reduced by quite a bit after the initial shooting in phase, I felt sure that the final fine tips not only quietened the bow significantly but they also sped her up a fair bit too. A final check on the scale was reading 52# at 28”. A good weight for most flatty fanatics (myself included). I really like this bow. I think she looks great and is a real character. She’s a pleasure to shoot being quiet, smooth to draw and pretty fast. She was sending 550 grain arrows whistling along to their destination with ease and I was quietly entertained by the noticeable slap that those stump heads were being delivered with.

Anyway, I hope you enjoyed the story of her build and like the look of her. This bow is now listed for sale in my Etsy shop and is available for purchase here: Primitive Character Yew Longbow 5228 – Etsy UK

Here are her stats and a bunch of pics. Enjoy!

Mass: 664 grams

Length NTN: 61.5”

Width: 2” at widest

Tips: 4” static 3/8” wide at tips

Back: Marginally crowned with undulations. Face profile pyramidal.

Belly Profile: Working limb sections undulating to mirror back, transitioning at the tips to D shaped then triangular cross sections.

Tiller: Elliptical 1/8” positive.

Brace Height 5 1/2″

Draw Weight: 52lbs at 28”

Yew snake skin and rawhide backed Deflex/Reflex Longbow. 56#@26” (Bow No. 13)

This bow was built out of one of a bunch of yew branches which all came from a group of yew trees which produce some really beautiful orange heartwood. In my experience, no two yew trees produce the same quality of timber, however all of the branch staves which came from these particular trees have a good ratio of heartwood to sapwood and they all have this wonderful bright orange heartwood.

This fortunately means that none of the branch stave cut from these trees are likely to need much, if any sapwood removal in order to optimise limb composition. This is really helpful as the growth rings on these particular branches are nice and tight which is definitely what I prefer in terms of optimal yew bow wood. But tight rings on yew staves with undulating backs makes chasing a ring quite a challenge! Particularly if the stave has lots of additional character – which is kind of what I like, and is oftenwhy I chose to use a particular stave in the first place!

This particular branch stave was pretty clean across one obvious potential face, however I have to admit that the glaringly obvious deflex was not an immediately attractive quality. Fortunately the deflex was evenly distributed through both limbs and the handle section. This deflex amounted to about 3” worth so was going to require a bit of thought and consideration.

Whilst thinking about how I’d work around all this deflex, I remembered seeing a couple of beautifully made primitive osage bows made by a well know and accomplished bowyer in the US call Mike Yancey. Mike owns and runs Pine Hollow Longbows out of Arkansas. If you haven’t seen any of Mikes work, then go check out his stuff. He’s done a few really interesting podcasts and has a few youtube videos which you might find interesting. His website is here: Traditional Archery – Pine Hollow Longbows and his youtube channel is here: Pine Hollow longbows – YouTube

A couple of Mikes signature bows have quite a bit of deflex deliberately built into their design. This has always intrigued me as I’d always assumed that lots of deflex would cost a bow significant cast. Mike seems unfazed by this though and counters it to some extent by flicking the tips. But even with the tips flicked, some of his shorter bows still carry a good couple of inches of deflex overall.

Despite all that deflex, Mike and his customers report that those same bows shoot fast, hard, smooth and quietly. So with this particular branch stave already carrying a lot of natural deflex, I decided to have a go at producing a bow with a similar side profile to the shorter bows which Mike makes. That way I could encompass as much of the natural deflex into the design of this bow as possible.

My plan was to produce a medium length (56-58” N to N) flatty with an elegant pyramidal front profile. I planned to flick the tips since they were relatively knot free, and I planned to keep the last 4” of the tips static. Mike uses Osage almost exclusively so I couldn’t be sure that his basic design profile would work for our English yew. So with this in mind I opted to keep reflexing down to a minimum with a view to offsetting some of the deflex but definitely not all of it. The flicked tips would also avoid excessive stack too given that this shorter than average bow was going to get tillered to 26”

The handle section on this stave was full of beautiful orange heartwood which I wanted to maximise the potential of as a feature, so I opted to keep the handle thick enough to show off all that wood. As a result of keeping the handle so thick, the handle would obviously end up rigid. This would result in the 4” handle section plus 3” fades taking 10 inches of the bow out of action. The 4” static tips would take a further 8” out of play too. This would leave only 20” of each limb available to work. That’s not a lot of moving wood to accommodate for a full 28” draw length so I opted to keep this bow to a 26″ draw length. Since 26″ matches my own draw length, that suited me just fine! So all of that natural deflex would now act as a bit of a buffer and would mitigate the risk of building a bow that was starting to resemble quite a high stress design. Maybe that’s why Mike deliberately builds in so much deflex on his high performance short osage bows.

This particular stave was fairly easy to rough out as the grain was quite uniform for the most part. I often find that our local yew wants to tear out, even when away from knots and other typical features. I have come to think that this isn’t necessarily due to propeller twist, but is more to do with our generally higher wind speeds stressing the limbs of our local yew into growing with an uneven cross section in order to brace itself against our stronger than average prevailing winds. In fact propeller twist is something that I seldom experience with our local yew. I wish the same could be said of our white woods!!

The face of this branch stave which I’d planned using as the back of the bow had previously acted as the top of this branch as it grew on the tree. As a result of this, the growth rings were tighter in this section of the limb when compared to the underside of the branch. The result of this growth is often that the pith of the branch ends up running closer to the face that acts as the top of the branch. This was the case with this particular branch. As such, the pith would need digging out of both limbs in order to optimise for limb compression strength and minimise the risk of bucked heartwood on the belly.

By the time all of the pith was out it was clear that this bow would end up incorporating a shallow hollow limb type appearance in the inner thirds of both limbs. This was just fine in my eyes as I find that a HLD cross section limb profile looks nice and enhances performance. So out came the gouge and the swan neck scrapper and soon I had both limbs free from pith and down to a nice even thickness of between 14 and 12mm distributed evenly between all the humps and bumps and twists and turns.

With the face profile and limb thickness roughed out, I got on with flicking the tips with a simple jig and some dry heat from a heat gun. I decided to keep the flicked section to a long gentle sweep rather than the usual 6” of more aggressive curve. This would allow half of the flicked section to do some work whilst keeping the last 4” completely static.

Next a small amount of dry heat was applied to the top limb fade in order to correct a small amount of string misalignment. Then it was time to cut some tillering nocks. I was quite happy with the side profile of the bow at this early point and was keen to see what the stave looked like during the first few pulls on the tiller tree. Other than an obviously stronger bottom limb, the first pulls looked nice. A bit of re balancing of the limbs to improve the elliptical tiller I wanted brought my eye back in so I could see that there were a couple of spots on both limbs which needed to be let off a bit. After that the rest of the tiller came together pretty quick.

The natural deflex and added reflex had created a shape which looked very nice once reaching full brace. Since this bow was symmetrical, I wanted to try and maintain a ¼ positive tiller throughout the tree tillering process knowing that the bottom limb on a bow this length would likely take on a fair bit of stress and a little set if shot split fingers.

Brace to 22” went smoothly but it was clear by now that a fair bit of weight removal would be necessary before pushing out to 26” as she was currently very heavy at 22”. I was aiming for a bow around 55-58 at 26” so stopped when I got to 55 at 24”. I’d shoot in the last 2” of tiller then adjust accordingly. So with the temporary nocks serving to let me shoot her in, I gave her a couple of weeks worth of stump shooting to settle in properly.

After a lot of shooting, all looked good and the positive tiller had held up well albeit reducing down to about 3/16″. It was clear by now that this design of bow was very efficient. In fact I was really impressed with the power and speed this bow was demonstrating. I shot stumps with her using some old battered 30″ 500# Gold Tip Traditional Classics which are as close to bomb proof an arrow as you’ll ever find and subsequently an excellent choice for blasting stumps with. They are also a very heavy arrow. Tipped with insert, ballistic collar and 150 grain stump heads, these things are coming in at 575 grains so I was expecting this bow to respond to them like it was being asked it to throw logs! But she was sending them on their way like my 50# Satori sends them. I was impressed!

Back at the workshop after all the shooting in the tiller still looked great and the finishing process could begin in earnest. I wasn’t intending to put this bow up for sale in my shop as this bow was intended to be a gift for a mentor of mine but I still wanted to enhance the durability of the bow’s back. So on went a couple of premium quality wild red deer rawhide strips to bomb proof her back. You can buy them here: One Matching Pair of Wild Deer Rawhide Strips – Etsy UK Then on went a couple of buffalo horn tip overlays. Last but not least, I wanted to use this bows rawhide covered back as a canvass so that the back could earn the right to sit next to all that gorgeous orange belly wood. So on went a whole King Rat Snake skin from tip to tip.

This bow had an arrow shelf cut into it to increase functionality. The shelf is cut pretty close to centre which has reduced arrow fussiness considerably. I refrained from wrapping the handle so the handle wood could shine. Covering up that gorgeous bright orange handle wood would have been criminal in my opinion!

After a very quick and easy re-tiller to account for the addition of the backings, I was ready to sand and polish her up. Then a little black and white artwork was employed along the boundary between the wood and the backing to make the contrast between front and back really pop.

To seal her up I gave her a few baths in Tung Oil to give her a wonderful satin finish which really suits yew in my opinion. Finally I built her a 12 strand B55 flemish twist string with nice small loops to keep everything in line whilst hanging onto those tiny nocks. Two Wild beaver fur silencers dampened down the tiny amount of sound that remained on this already whisper quiet bow. Fur silencers also look pretty cool and in keeping with the overall primitive theme in my opinion. You can buy them here: 1 X Pair of Beaver Fur Bow String Silencers beaver – Etsy UK

I have to say that I’m really impressed with this bow. And even though the wood that this stave provided was a major contribution to the efficiency and performance of this bow, I simply can’t help but think that this deflex reflex profile enhanced the smoothness of the draw and the retention of power which might have been lost through set born from a straight or reflexed starting point.

I’m going to continue to experiment with this profile further. I want to confirm whether or not the performance of this bow can be readily replicated in other bows of similar stature. I’m also now curious to see how bows of other woods would perform when designed this way. I will keep you posted on my findings!

Here are the stats and the photos. I hope you like her:

Mass: 566 grams

Length NTN: 56 3/4”

Width: 1 3/4” at widest

Tips: 4” static 3/8” wide at tips

Back: Marginally crowned with undulations. Face profile pyramidal.

Belly Profile: Working limb sections concaved to mirror back, transitioning at the tips to D shapes then triangular cross sections.

Tiller: Elliptical 1/8” positive.

Brace Height 5 1/2″

Draw Weight: 56lbs at 26”

Snake Skin Rawhide Backed Yew Character Longbow 48#@28″ (Bow No. 12)

A mate of mine gave me this stave ages ago and said ” I bet you cant make a bow out of that!” To be honest, on first inspections I agreed with him!! But on closer examination, in principle, this 4-5″ diameter yew branch had plenty of potential. For a start, the best face (which had been the top of the branch as it grew of the tree) was fairly clean of knots, bar a few wispy bits of epicormic growth. With this face showing promise I inspected the cut ends of this 74″ branch. The sapwood/heartwood ratio looked good with about 8mm of sapwood showing. The heartwood was a beautiful dark orange and densely ringed. The pith was clearly biased towards the face I could use, which was to be expected given that the top of a branch typically has the thinner growth rings, and this was certainly the case with this particular branch.

The thinner end of the branch had a big drying split extending several inches into the usable part of the branch so it was obvious that this section would end up as an offcut. That would leave me with around 65″ of decent stave to work with. The branch was certainly undulating along it’s entire length and very slightly reflexed along what would be both limb sections, however the section which would make for the handle had a significant roll in it due to a massive knot on the belly side. This knot was going to require some thought to deal with. The large roll that this knot had produced was also presenting some deflex in what would be one of the handle fade areas, but only on one side. This would need to be either excepted as character and incorporated into the bow design, or possibly heated out to some extent.

This knot was presenting another problem too as it was causing a significant side bend which would throw the string alignment out of centre by a good couple of inches. The likely hood of this misalignment being removed completely was low since I could see that this large knotted section would only bend through substantial steam heating. To over cook an already cracked knot like this would invariable result in a massive crack right in the lower fade/handle so I was forced to except that the best I could hope for in relation to fixing the string mis-alignment was to end up with a bow with the string slightly favouring the side which it naturally wanted to. This was a shame as I’d sooner the branch was bent the opposite way as the limb which would have to be the lower limb was nice and snakey, and therefore the limb which was carrying the most character. I’d much sooner that this limb had made the top limb since it’s always better to have the most characterful limb as the top limb, or at least in my opinion!

Despite the branch being 4″ wide at the thin end (closer to 5″ at the fat end) the face which was usable was quite crowned. In my mind a bow made from a branch like this one would benefit from having hollowed out limbs. Digging the limbs out would also ensure that all of the pith was removed since the pith was running close to the back of the stave in the thinner end.

So after getting the bark of so i could see exactly what i had to work with, I cut the branch back to 65″. I then began reducing the belly material with the axe. Once an approximate limb orientation and thickness had been established I set about working down the edges to create and approximate face profile. The branch was starting to look something like a roughed out bow now so I set about working out exactly where the handle and fades would sit. My idea was to turn this stick into a 50lb ish, asymmetrical, pyramidal longbow with a four inch handle and 3-4″ fades. I also liked the idea of flicking the tips very slightly, and on a yew HLD this long, the tips could easily be static.

I decided to go for a contoured handle with a shelf. The large knot was going to be located in the bottom of the handle where the fade transition was going to be. This unfortunately put the large roll which was previously mentioned right in the bottom fade too. due to the shape of this roll, it was becoming apparent that I was going to have to except a thicker bottom fade. Had I tried to keep the fade thickness the same for both the top and the bottom, I’d have ended up with a handle which would have been shaped in a way which was uncomfortable to hold. So I decided to accept the thicker lower fade and use it as an opportunity to act as a canvas for the rather beautiful, albeit inconvinient knot.

With everything now roughed out I got the handle over a pan of boiling water and set the timer for 45 mins. Whilst she was steaming away, I said a quiet prayer the the bow gods and asked that they would see that the knot did not split through the handle and fade. My prayers where obviously heard as the thin seasoning check which was there already did not get any worse. So with the handle and fade nice and hot I put the stave into my bending jig and gently eased the string alignment back to centre. After cooling for several hours the clamps came off and further inspection confirmed that the string alignment was now just a tad off centre and favouring the correct side for a righty. Hopefully it would stick!

Next I flicked the tips with the heat gun whilst the limb thickness was still excessive. At least that way, if one of the small pin knots popped during bending I might have some extra material I could remove to take out the cracked pin. I didn’t go mad with the recurve jig so the tips survived the modest amount of flick. At this point I was thinking back to a post I’d seen on PA years ago where a seasoned bowyer had used antler main beam to reinforce and make static recurves on a beautiful osage primitive. I’d put aside a few bits of Red Deer main beam with the intention of trying this strategy for my self some time. So I decided that now was the time to give antler reinforced static tips a go!

After matching the antler pieces to the shape of the recurved tips, I glued and clamped them in situ with TBIII. This would now mean that the tips were set in place so if the tips needed alignment work later on then I would have to apply heat and bend from within the working section of the limbs, fades or the handle. Since the tips actually lined up reasonably well already, I didn’t envisage having to do much tweaking except maybe for some very minor twist. This small amount of twist came out quite easily with some dry heat later on.

Now the tips were set up I proceeded to hollow out both limbs. First with the gouge and then the goose neck scraper I mirrored the various undulations found on the back and projected those same contours onto the belly in reverse. Where there was a hump on the back, the belly would get dug out deep. Where there was a flatter spot on the back, I would shallow out the digging. By aiming for any even 14mm thickness at every spot between the handle fades and the fades of the static tips, it was pretty easy to get a good floor tiller.

Temporary nocks were cut into the tips which, at this point, were still oversized in terms of width. Then onto the tillering tree she went for some first pulls with the long string. The bottom limb looked very stiff so that was dealt with first. Next the inner third of the top limb was let off a touch until the elliptical tiller I was gunning for was achieved. With both limbs bending evenly, albeit with a slightly stronger bottom limb, I got her braced. At this point she was still very heavy so after working down to 50lbs at 22″ I decided to stop and get a rawhide backing on her.

After hide gluing on a couple of nice, thin, strong, home produced red deer rawhide strips, I considered decorating the rawhide with artwork, or maybe a stain. But then I remembered that I had a really beautiful full length cobra rawhide begging to be used somewhere in the workshop. On the cobra skin went along with a pair of red deer antler tip overlays and some deer back strap sinew to secure the antler static tip reinforcements. This sinew wrapping would also double as a means to cover the transition between the end of the cobra skins and the underlying rawhide.

After a week of drying she went back on the tillering tree for the last part of the journey. She was in need of a bit of rebalancing since the backings had moved the tiller a bit but in pretty short time she was back to an nice elliptical 1/8″ positive, pulling around 48# at 26″. I took her our stump shooting for a week to shoot in the last couple of inches as I always do. Final assessment (post shooting in) was that the tips needed just a fraction of twisting in opposite directions to get some better string alignment. Other than that she was holding the positive tiller and after a couple of hundred arrows had settled into 48lb at 28″.

Final touches where a nice thick piece of red stag neck rawhide for a handle covering, and a touch of black stain on the section of exposed rawhide visible at the tip sections. This stain was then wire wool scrubbed to create an aged look. I deliberately left the tips unbacked with the cobra skin as in my experience, snake skin will often end up getting very worn and tatty towards the tip of the upper limb due to the constant rubbing brought about by stringing the bow.

I painted the edges of the snake skin with a thin black boarder line overlayed with white dots to make the contrast between the tan snake skin and the yew sapwood really pop. And the whole bow including the rawhide handle was finished with 6 coats of tung oil applied over a couple of weeks to let it really soak in. I find that this type of satin oil finish really draws out the grain of yew heartwood really well.

I really like how this bow came out even though she is a big heavy girl. I think she’s a real looker with lots of character. And she can sling an arrow too! The obvious advantage of having a bow like this one with string alignment which clearly favours the left side, is that arrow fussiness is not an issue. I shot 40#, 50# and even 60# arrows through this bow and they were all achieving acceptable arrow flight. I was a bit concerned that the weight of the antler reinforcements in the static tips would create a bit of hand shock but by keeping the mass down to a minimum, hand shock is not an issue.

As much as I love the look and performance of this bow, I’ve not got the space for her and would love to see her end up getting shot with the degree of regularity which she desires, so this bow will be made available to buy through my shop. If you would like to become her proud owner then please visit my Esty shop here: Snake Skin Rawhide Backed Primitive Yew Longbow 4828 – Etsy UK

Here are the stats:

Mass: 858 grams with string

Length NTN: 64”

Width: 1 7/8” at widest

Tips: 8” static 7/16” wide

Back: Marginally crowned with undulations. Face profile pyramidal.

Belly Profile: Working limb sections concaved to mirror back, transitioning at the tips to D shapes cross section.

Tiller: Elliptical 1/8” positive.

Draw Weight: 48lbs at 28”

Elm HLD Heat Treated Rawhide Backed Longbow 58#@28″ (Bow No. 11)

This bow came from a nice clean, straight, undamaged English Elm stave which I cut back in the winter. I roughed it out green and clamped it to a slightly reflexed form to force dry it over the wood burner for a week. I then took the roughed out stave off the form and left it hanging up in the ceiling above the wood burner for a month to dry to the point of no further weight loss.

Once the stave was good and dry I chose a shape and profile (HLD pyramidal longbow with static tips) which suited the length and width of the stave (6ft X 3”). I then cleaned it up close to final dimensions and then floor tillered it. The shape looked good so I continued to tiller to brace then carried on down to 22”. I was gunning for a nice positive elliptical tiller and a final draw weight in the upper 50s as this bow was for someone who wanted a nice clean, simple, hunting weight primitive longbow.

All looked good except for a little bit of propeller twist which was making its presence known, so I opted to straighten that out whilst heat treating the slightly dug out belly. So after fixing the stave to the form again and using clamps to pull out the propeller twist I set to cooking the belly.

Half an hour with the blow torch got the belly nice and dark but without any cracks. I’ve learned over the years that properly dried whitewood staves wont check as easily when heat treated as those which are still holding 10% or more moisture. This stave was down to about 6% moisture content so I could get away with using the heavy heat application which comes with using a blow torch to heat treat the belly of a bow. Give it a try and you’ll see what I mean.

After a day to cool and reacclimatise, I checked the tiller again. The heat treating had banged on some weight and gotten rid of the propeller twist nicely. The stave was now holding about an inch and a half of reflex too. After tillering down to 26” I was getting 63ish lbs so I decided to shoot in the last 2 inches and see if the positive tiller would stick.

A few days slinging stump heads in the woods gave me chance to really shoot her in. All looked good however the tiller was now looking a bit too neutral and since this bow is symmetrical and the guy this bow is going to shoots split fingers, I opted to take some more wood off the top limb to regain that positive tiller.

With everything looking nice, I set about rawhide backing this bow to add some extra durability. As much as I love self bows, the simple reality is that one ding in the wrong place, (especially on the back and sides, or worse still back corners) and a bow could easily be compromised. I like the protection that properly made and fitted deer rawhide gives to the back of a stave bow.

I back many of the bows which are going to end up in the hands of other people as I know how rough others can be with bows.  On this particular bow I opted to use some really nice thin wild red deer rawhide which I produce from deer that I’ve hunted over the winter. I process this rawhide the traditional way which ensures that it remains good and thin but incredibly strong. I sell this rawhide for a very reasonable price in my ETSY shop: Southmoorbows – Etsy UK. You can buy it here: One Matching Pair of Wild Deer Rawhide Strips – Etsy UK

After a couple of days for the titebond III  and rawhide to dry thoroughly, I set about trimming the rawhide and fitting some really nice Red Deer antler tip overlay (which you can buy here: Wild English Red Deer Antler Whole Coronets 3.5 Long – Etsy UK)

After sanding the whole bow down and polishing her up with wire wool, I stained the wood with an alcohol based black wood stain. The rawhide got treated to a coat of leather dye which once dry was wire wool scrubbed in the mid limb section to give it an aged and worn appearance.

 All the final scrapping and sanding to finish brought the weigh down to 59lbs at 28”. A further few shooting in sessions saw the weight settle in to 58lb at 28”. This was about perfect.

On went a piece of my own home produced, lovely, thick wild red deer neck rawhide for a handle covering (which you can buy here: 5 X 6 Wild Red Deer Rawhide Piece 0.4 1mm Thick – Etsy UK). This rawhide handle covering got a coat of leather stain too. The handle and the bow itself were then both treated to half a dozen coats of tung oil over the next couple of weeks to seal her up good and tight.

Whilst this bow is a bit on the heavy side for me personally, the guy who received this bow loved it. It is indeed a punchy bow with no noticeable hand shock, and very quiet too. It would make a really great hunting bow.

Here are the stats and pics. Hope you like!

Mass: 678 grams

Length NTN: 67”

Width: 1 7/8” at widest

Tips: 5” static 3/8” wide

Back: Marginally crowned with minimal undulation. Face profile pyramidal.

Belly Profile: Working limb sections concaved to mirror back, transitioning at the tips to triangular cross section.

Tiller: Elliptical 1/8” positive.

Draw Weight: 58lbs at 28”

5 X 6 Wild Red Deer Rawhide Piece 0.4 1mm Thick – Etsy UK
Wild English Red Deer Antler Whole Coronets 3.5 Long – Etsy UK
One Matching Pair of Wild Deer Rawhide Strips – Etsy UK
1 X Pair of Beaver Fur Bow String Silencers beaver – Etsy UK

Holly Heat Treated Self Bow 40#@28″ (Bow No. 10)

I’ve had the stave this bow came from hanging in the rafters for at least three years and to be honest, I can’t for the life of me remember where it came from. Every time I moved it out the way to get to a different stave it would catch my attention. I love making bows from holly as it is excellent bow wood (if you can find a clean straight bit that is!) But every time I inspected this particular stave I’d be reminded of the bloody great chainsaw cut which was three parts of the way through the belly of what would end up being one of the limbs outer 1/3 sections. (Bloody tree surgeons!) And that is why this particular stave kept getting put  back in the rafters!

There was little intact belly wood remaining usable at this cut point, which led me to believe that the likelihood of this stave making a bow over 20lbs was low. So with those thoughts in my head I decided to quickly chop down to the bottom of the saw cut to see exactly how much wood remained intact. If there wasn’t enough I’d just scrap the stave and make space in the rafters.

But after 10 mins with the axe I was able to see that there was actually a little bit more wood left behind than I first thought, although definitely not enough to make a hunting weight bow. Enthused by this discovery I roughed out a basic profile and limb thickness to see exactly what I was able to play with. About 8mm of wood was all of what remained just outside of where the static tip fade would end and the working part of the outer limb would start. Not Ideal!

After completing the roughing out of both limbs, I set to tillering the stave to brace height. At this point I could see that some fairly minor propeller twist and string alignment issues would need resolving before taking the tiller much further. At this point it was already apparent that the weight was going to end up pretty low so I thought I’d have a go at fixing all the bending and twisting issues whilst at the same time adding a few more pounds of draw weight through heat treating the belly of the stave. The heat treatment took place whilst the stave was clamped strategically into an optimal position on a form with a touch of reflex. And it worked out pretty well! After taking a blow torch to the entire belly for half an hour, nearly all of the propeller twist came out, and the string alignment was resolved to. And all whilst adding a good 5 or 6lbs of well received draw weight too! Bonus!!

After tillering down to 26” on the tree I was now getting about 40lbs ish on the scale. So with a slightly whippy positive tiller I decided to shoot in the last couple of inches rather than pulling her down to 28” on the tillering tree. I often find that I’m best doing this towards the end of the tillering process as lets face it, the way we pull on a bow when actually shooting it is really quite different to how the bow is stressed on a tillering tree.

After a couple of hundred arrows I checked the tiller and all looked good so I finished sanding her down which knocked a pound or so off and left her pulling 40lbs at 28”. The positive tiller held good and I was pleased to have managed to pull off a sweet shooting light weight selfy, which actually looks quite good. I really like the contrast between the light and dark of the back and belly. Buffalow horn tip overlays also contrast sharply with the light wood of the back.

I finished the handle with some really nice thick wild red deer rawhide which I processed myself from a neck cape which came from a stag I shot back in the autumn. After re-wetting the rawhide and forming it around the contoured grip I let it dry for a couple of days. Once dry it got trimmed, punched, stained and glued/sewn back on. I dyed the rawhide dark tan with an impressive product which is new to me, Leather Dye WB – Furniture Clinic. I’ll certainly be using this product again as it works extremely well on rawhide. It’s a water based leather stain and soaks into both dry and wet rawhide amazingly. It penetrates really deep and dries quickly too and once dry it doesn’t rub off either unlike many other leather stains I’ve used before. And as it is a water based stain, you can oil over the stain to leave the whole thing totally water proof and looking like traditionally tanned leather. After a single coating of the leather stain I gave this particular handle covering along with the rest of the bow 6 coats of tung oil. Each coat being left a couple of days between coats to soak right in. I love the satin finish tung oil gives and I think that it sometimes suits certain bows better than the usual glossy Truoil type finishes. The handle covering is glued in situ with Titebond III.

The string is 12 strands of B55 and the silencers are Wild Beaver fur.

This bow would make a great ladies/tennagers primitive longbow and will be listed for sale on my ETSY Shop very soon. My Shop can be found here: https://www.etsy.com/uk/shop/Southmoorbows?ref=l2-about-shopname

Stats are as follows:

Mass: 554 grams

Length NTN: 62”

Width: 1 ¾” at widest part

Tips: 4” static 3/8” wide

Back: Moderately crowned with valleys. : Pyramidal face profile

Belly Profile: Undulating between flat and concaved to mirror the bows back.

Tiller: Lightly whipped. 1/8” positive

Brace height: 5 1/2″

Draw Weight: 40lbs at 28”

Here are the pics. Hope you like her!

Sinew and Snake Skin Backed Yew Recurve 50# @ 28″

After a break spanning a few years, I’ve been experimenting with snake skins again recently. I love snake skins as a backing material as, in my opinion, they look amazing and are fairly simple to apply if you know what you’re doing. Admittedly my first couple of attempts to apply snake skins to a bow where less than perfect. But I’ve got a system in place now which is simple and effective and seems to work very well for me. At some point in the future I’ll do an article on my own quick and simple way of applying snakes skins.

The only trouble I find with snake skins is trying to source them here in the UK. I once paid an absolute arm and a leg to import a pair of Western Diamondback skins from the USA. As beautiful as those skins were, I simply can’t justify the cost of getting skins from traditional species of North American snakes into the UK these days. So I’ve started to use skins from Asiatic snake species instead.

The skins shown in the pics below are imported from Asia and are from a very common species of snake loosely referred to as the Asian King Ratsnake – Elaphe carinata. In terms of their conservation status these snakes are currently ranked (LC-least Concern) by the IUCN- See here: Elaphe carinata – Wikipedia. Whilst there is no doubt that these skins are not as pretty as skins from something like a North American rattle snake or even a Boa, I still think they look pretty amazing! And these Asian skins cost a mere fraction of the price of a pair of rattler or Boa skins!!

The bow featured in this post is one of my older sinew backed Yew recurves. A friend of mine asked me a while back if I had a hunting weight primitive bow which a mate of his could buy from me to hunt deer with. (Not here I hasten to add!!) This particular bow was one of my favourite stumping bows. It’s compact enough to be woven through the scrub and it certainly packs plenty enough punch to deliver appropriately weighted arrows for a lethal shot on a deer sized target.

Since this particular bow has seen many hundreds, if not thousands of arrows through it I can reliably say with certainty that this bow will withstand a lot of use and abuse, so I offered this bow to the avid hunter after re finishing it for the guy with the addition of a snake skin backing to provide an aesthetic upgrade, as well as a modest camo effect.

I also replaced the fairly battered old leather handle with my new favourite cover material – home processed and prepared deer rawhide. What an amazing handle cover material deer rawhide is! Not only does it look great after staining (note the marbled like effect from using a dark leather stain wiped off with pure isopropyl alcohol), but it’s also an incredibly hard wearing material. Deer rawhide must be sealed though else it will absorb water, but that’s no problem as raw hide will also take an oil finish like Truoil or Tung oil really well so you can oil finish/waterproof the handle at the same time as you oil finish/waterproof the bow wood.

Here are a few photos of the re-finished bow. Hope you like!:

Elm Sucker Character Flatbow 40lbs @ 28” (Bow no. 9)

I was given a 3” elm pole by a mate of mine who coppiced a butch of the stuff in one of his hedgerows last year. Many of the poles/logs were around the 3-5” mark so I asked him to save the better stems in his barn so I could pick through them at some point. Many of the stems had been attacked by the beetle and were unusable, which was a real shame because some of the stems would have been perfectly good bow staves had it not been for all the damage below the bark.

In this part of the world we are cursed with Dutch elm disease. It really is quite rare to find an elm stave which doesn’t have any damage at all. I have tried making character elm bows out of badly beetle damaged elm before, but have concluded that the weakness induced by the fungal pathogen will invariably lead to a broken bow at some point in the future.

One or two small spots of black rot tends to be ok though, so the stave which made this bow was given a chance to prove itself, as I really liked the slight wiggle and snake this stave reflected after roughing out. In addition to the tiny bit of beetle damage, I had to negotiate a few other features too, such as knots, drying checks and some propeller twist which came out pretty easily witha little dry heat.

Given the undulating back of this stave I decided to try and mimic the topography of the back on the belly, but in reverse of corse. This created a slightly hollow and varied contour to the bulk of the bows belly. I also opted for a slightly hollow belly in order to maximise the potential for removing some of the beetle damage which was apparent on the belly of the bottom limb.

In order to get the worst of the beetle damage out of the stave I ended up with quite thin limbs, both in terms of width and thickness. As a consequence I ended up with a bow which is a bit on the light side, finishing out at about 42lbs after the initial shooting in phase. Since sanding and finishing the bow, plus a lot more shooting in, she has now settled into about 40# @ 28”. Not too bad for a pretty gnarly elm stick!

I know a lot of trad archery folk hate arrow shelves but I’m not one of them. I like an arrow shelf simple because I can shoot arrows with feathers without having to wrap the fronts of the fletching in order to prevent a quill winding up embedded in my hand.

As much as I like shooting my own primitive arrows with feather fletchings wrapped with sinew, I do find that the raised sinew wrapping can sometimes cause a bit of deflection when it makes contact with the arrow pass or arrow shelf. I often see this deflexion manifest as a false nock left. Or if shooting of a shelf, a false nock high and left.

In addition to an arrow shelf I went to the effort of putting tip overlays on her. If you read my previous post you will have seen that I have recently come across a really nice and very old yew log which has been exposed to the elements in a dead state whilst still being attached to a huge and very old yew tree.

This exposure to the elements has resulted in the sap wood completely rotting off the log leaving pure yew heartwood behind. On closer inspection this heartwood was encapsulated in a 1/8th inch thick layer of dark, hard and perfectly preserved resin saturated timber. This resinous outer coating is hard like oak. It is impossible to mark it with a finger nail (unlike normal yew heart wood) so I decided to try making tip overlays with it, with a view to making sure that the overlay was situated so that this really hard and wear resistance outer layer would be the surface which the bow string would contact with. My idea worked very well and the overlays look lovely contrasting sharply against the light coloured elm sapwood. I’ll certainly use this petrified yew log to produce other overlays in the future.

The handle wound up being a deeply contoured grip style which would have made it quite difficult to wrap a piece of tanned leather around so I opted for a piece of roe deer raw hide which I made myself recently. (Article to come shortly.) I stained it with some leather stain since it was quite bland looking. It looks all right and almost kinda marbled. And despite it being paper thin, it feels really nice and durable. I expect it will outlive the bow by a mile!

This bow was finished with 8 coats of truoil and has stood up well to a fair bit of shooting. I’ve matched it up to a set of handmade 35# 400 grain bamboo arrows, fletched with turkey wing feathers and tipped with modified empty bullet cases for stump heads. These arrows shoot very well and over the chrono I got an average speed of 142ft/sec.

It never ceases to amaze me how tough bamboo arrows are. Despite being shot dozens of times at all sorts of stuff all three arrows are still going strong!! I intend to do a detailed arrow build at some point so keep an eye out for that article coming at some point this year. I’m also working on a pile of new bows which I hope to show off soon.

Anyways, here are the pics! Hope you like!!